Toyota Tundra

Lighting Upgrade Project

See how Fastline Wiring & Fabrication upgraded a late-model Toyota Tundra with a custom lighting system. Professional wiring, clean installation, and off-road-ready performance in Arizona.

480-269-7178 Get a Quote for Your Build

Red metal panel with wiring, control boxes, and a diamond-plate section in an industrial setting

Hand holding a crimped wire near small connectors and text reading “Crimped and tested”

Hand holding a gray electrical connector with red and black wires on a workbench, with tools nearby

Close-up of crimped red and black wires held together, labeled “Crimped and tested” on a workbench.

Close-up of crimped red, black, and white wires held in hand, with “Crimped and tested” text visible.

Gray Deutsch DTM connector with red and black wires on a workbench, next to a blue-handled screwdriver.

Hand holding a coiled black cable on a gray workbench with a roll of tape nearby

Black dual-wall heat-shrink tubing with potting compound splice on a gray surface

Close-up of a car fuse box with colorful fuses and exposed wiring.

Hands holding red and black wires with heat shrink tubing and potting compound on a gray workbench

Two wires with black heat-shrink and potting compound on a metal surface

Heat-shrink tubing on power, ground, and signal wire splices, with a hand holding the wires.

Car fuse/relay box with red and white wires connected, labeled wiring setup for 12V keyed and constant power.

Hand holding a transparent LED light strip panel with white LEDs and black base, on a workbench.

LED factory front fog light kit for 2022 Tundra with two black light bars and yellow wiring on a floor

Close-up of black LED light housing with red and yellow wires and “LED Factory weather proofing” label

Wiring test setup with black panels, red/yellow wires, and note about heat-shrink and Kapton tape every 50 mm

Black box in stock harness with red and black wires, secured by a zip tie on a metal surface.

LED factory panel with many lights, a central exposed component, and overlaid repair text.

Hand holding orange Deutsch connector; pin crimper tools and stripped wire on workbench.

Hand holding stripped red and black wire ends on a workbench, labeled “Stripped and trimmed”

Hand holding orange wire above black battery packs and stock connector with heat shrink labels

Close-up of a hand holding a black wire connector with red and black wires on a concrete floor.

Black wiring harness with connectors and red leads laid on a concrete floor.

Three coiled red-and-black wires on paper labeled “Stock power, ground, signal measured and cut”

Hand holding black and red wires joined with heat shrink and yellow Kapton tape on a white surface

Red and black wires with exposed end on a workbench; text notes 10% over measurement for trimming, stripping, pinning.

Hand holding two gray car wire connectors with red and white wires; text notes no weatherproofing or seals.

Close-up of a black car’s front headlight and open hood in a garage, with orange lift equipment nearby

Silver SUV in a garage with hood open, showing front grille and headlights next to shelves and tools.

Close-up of red-handled pliers stripping a wire into a connector, with “Proper wire engagement in pin” text.

Tell Us About Your Project

Fastline Wiring & Fabrication provides professional lighting installations for Toyota Tundras and other off-road vehicles throughout Arizona. Whether you're adding ditch lights, light bars, rock lights, scene lighting, or a complete auxiliary lighting package, Fastline delivers clean installations designed for reliability and performance.

If you're looking for a shop that specializes in custom wiring, switch panels, lighting systems, and off-road electrical upgrades, contact Fastline Wiring & Fabrication to discuss your next project.

Toyota Tundra

﻿Lighting Upgrade Project

Tell Us About Your Project

Lighting Upgrade Project